How Air India’s Boeing 787 Dreamliner crash unfolded second by second on June 12, 2025

Indian investigators are expected to delay issuing a final ​report into a deadly Air India Boeing 787 crash by the one-year anniversary ‌on Friday, citing the ​need to complete an analysis of the plane's engines, according to a source with knowledge of the matter.Here is the sequence of events - by the seconds - on June 12, 2025, as detailed by Indian investigators in their preliminary report released on July 12 last year:05:47 GMT (11:17 a.m. IST): Air India Dreamliner VT -ANB landed in Ahmedabad from New Delhi as AI423.07:48:38 GMT: The aircraft was observed departing from Bay 34 at the airport.07:55:15 GMT: The aircraft requested taxi clearance, which was granted by air traffic control; a minute later the aircraft taxied from the bay to Runway 23 ‌via Taxiway R4, backtracked and lined up for take-off.08:02:03 GMT: The aircraft was transferred from ground to tower control.08:07:33 GMT: Take: off clearance issued.08:07:37 GMT: The aircraft started rolling.08:08:39 GMT: Aircraft ‌lifted off. The aircraft air/ground sensors transitioned to air mode, consistent with ‌liftoff, the report said.08:08:42 GMT: Aircraft reached max airspeed of 180 knots. Immediately thereafter, the ‌Engine 1 and Engine 2 ‌fuel cutoff switches transitioned from RUN to CUTOFF position one after another with a time gap of 01 sec.The Engine N1 ​and N2 began ‌to decrease from their take-off values ​as the fuel supply to the engines was cut off.In the cockpit voice recording, one of the pilots is heard asking the other why did he cutoff.The other pilot responded that he did not do ​so.The CCTV footage obtained from the airport showed Ram Air Turbine (RAT) getting deployed during the initial climb immediately after lift-off.The aircraft started to lose altitude before crossing the airport perimeter wall.08:08:47 GMT: Both engines' values passed below minimum idle speed, and the RAT hydraulic pump began supplying hydraulic power.08:08:52 GMT: Engine 1 fuel cutoff switch transitioned from CUTOFF to RUN.08:08:56 GMT: Engine 2 fuel cutoff switch also transitioned from CUTOFF to RUN.When fuel control switches are moved from CUTOFF to RUN while the aircraft is inflight, each engines full authority dual engine control (FADEC) automatically manages ‌a relight and thrust recovery sequence of ignition and fuel introduction.Engine 1’s core deceleration stopped, reversed and started to progress ​to recovery. Engine 2 was able to relight but could not arrest core speed deceleration and re-introduced fuel repeatedly to increase core speed acceleration and recovery.08:09:05 GMT: One of the pilots transmitted MAYDAY MAYDAY MAYDAY.08:09:11 GMT: Data recording stopped.08:14:44 GMT: Crash fire tender left ​the airport premises for rescue and ‌firefighting.